Build a GIANT Bulletin Board for under $50

How to Build a Giant Bulletin Board

Supplies:

• 1 sheet of 1/2″ homasote (4′ x 8′)
• 3 – 1x2x8 pine boards
• 4 – 1x3x8 pine boards
• 2 – 3/4″ plywood scrap boards (at least 5″ x 24″)
• wood glue
• finish nailer & nails
• drill & bits
• wood screws
• 2 – french cleats
• miter saw
• sandpaper
• circular saw
• paint & roller
• stain & foam brush

Step 1: Cut homasote to desired size.

Step 2: Gently sand pine boards then apply stain with foam brush.  Wipe excess and let dry thoroughly.

Step 3: On back of board near top edge at center secure one piece of scrap plywood with glue and countersunk screws.  This will hold the french cleats.

Step 4: Near bottom edge at center of board secure other scrap plywood piece.  This keeps the entire bulletin board plum against the wall once hung.

Above is the french cleat hardware.  I choose to use 2 smaller cleats because my wall is not flat, having 2 cleats allows the bulletin board to give slightly with the wall.  Secure one piece of each cleat to plywood scrap as per below.

View of backside of bulletin board with cleat hardware secured to plywood.

Step 5: Paint homasote desired color two coats.  Cut 1×2 board with 45 degree mitered corners to fit longer edges of board first.

Step 5: Apply glue, clamp flush to edge of homasote then finish nail in place.

Step 5: Drive screws from the backside up into the 1×2 frame portion for added security.

Step 6: Cut 1×3 to fit length of board.  Apply glue to edge of homasote and 1×2 frame piece.  Place 3/4″ spacer on top of 1×2 frame piece.  Hold 1×3 perpendicular and flush to top of spacer board then finish nail into both the homasote and 1×2 frame piece.  This gives you a nice 3/4″ lip on interior of frame and also a neat 1/2″ on the backside which covers any view of the hardware from the side.

Step 7: Secure french cleat hardware to wall at desired position to match spacing on back of board, be sure to check for level.

Hang and enjoy.   I like to consider this framed bulletin board a very useful piece of wall art.

Looking for more diy furniture builds?  Below are some recent pieces I completed:

An x base circular dining table that my kids have claimed as a homework station.

A diy classic lemonade stand recently built for a friend’s Fall festival.

And lastly this diy sliding barn door console that I still can’t believe resides in our home!

Thanks for checking in friends.

———————————————–

Looking for more  ways to organize your family’s papers and schedules? Try these:

Build a Chic Divided Chalkboard Calendar

Build a Glass Dry Erase Message Board

Build an Elegant Magnet Board

My name is Jaime Costiglio and I write the blog That’s My Letter. What started off as a kitchen makeover documentation blog 3.5 years ago has warped into a full on project based blog focused on building, painting and sewing. All the project posts are DIY and include tutorials with photos. I typically stick to wood, paint and fabric as my mediums to build furniture and crafts, paint furniture, make signs, and use fabric to sew home decor, accessories and gifts. I reuse and repurpose consistently and always, always use what I have first before buying new.

Related

We love hearing from fellow Remodelaholics, so let us know what you like about this and leave any questions below in the comments. If you’ve followed a tutorial or been inspired by something you’ve seen here, we’d love to see pictures! Submit pictures here or by messaging us over on Facebook.